manualshive.com logo in svg

Monogram ZIP360NH, Руководство по установке

Поделиться
Скачать
Monogram ZIP360NH Скачать руководство пользователя страница 25

Design Guide - Flush Installation

3/4” DECORATIVE PANEL DIMENSIONS

For a more custom appearance, overlay panels may be 

installed to give a flush appearance with surrounding 

cabinets. The overlay panel must be 3/4” thick. Panel 

attaches to included brackets to provide mounting to the 

appliance door.

NOTE: We recommend that decorative panels have inside 
corners and edges rounded or beveled by cabinet maker 
to avoid sharp edges on the panels. Edges to be treated 
should include the top, bottom and hinge side edges.

IMPORTANT NOTE: Maximum total weight for the assembled panels:
• Fresh food door panels – 30 lbs.
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.

Grille Panel

Fresh

Food

Panel

Fresh

Food

Panel

38"

18-3/4"

18-3/4"

10-13/16"

Freezer Drawer

Panel

22-3/8"

46-7/16"

Improper installation can lead to a finger pinch 
point hazard between the side door trim and the 
cabinets when operating the door, especially 
with children.  To minimize this risk you must 
follow the installation instructions for cabinet 
dimensions, trim assembly, and door stop angle.

Door Trim Pinch Point Hazard

WARNING

CUSTOMIZATION BASICS: 
Framed Or Overlay Panels, Custom 
Handles and Accessory Kits

These refrigerators are designed to be customized with 
decorative panels. Field installed custom door and grille 
panels are required.
Side Panels 
Side panels must be used whenever the sides of the 
refrigerator will be exposed.

REFRIGERATOR LOCATION

•  Do not install the refrigerator where the temperature 

will go below 55°F (13°C). It will not run often enough 

to maintain proper temperatures.

•  Do not install the refrigerator where temperatures will 

go above 100°F (37°C). It will not perform properly.

•  Do not install the refrigerator in a location exposed to 

water (rain, etc.) or direct sunlight.

•  Install it on a floor strong enough to support it fully 

loaded.

25

Содержание ZIP360NH





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды