Monogram ZIP360NH Скачать руководство пользователя | Manualshive

Страница: 35 / 52

background image

35

Installation Instructions - Flush Installation

STEP 8 ALTERNATE ANTI-TIP

PROCEDURE

The refrigerator must be secured to prevent tipping.
If the anti-tip bracket cannot be used, this alternate
procedure may be used to secure the refrigerator
against tip-over

• Raise the grille panel to access case trim.
• Use a 3/16” bit to drill four evenly spaced clearance

holes through the metal top case trim.

• Use a 1/16” bit to drill to pilot holes through the metal

clearance holes and into the wood soffit. The holes
should be centered in the soffit or a 3/4” min. wood
brace. The brace spanning the enclosure must be
securely fastened to cabinets on both sides.

• Install four, 1-1/2” drywall screws into the pilot holes.
• If no soffit above the unit, drill screws into adjacent

cabinets through the side case trim.

Improper installation can lead to a finger pinch
point hazard between the side door trim and the
cabinets when operating the door, especially
with children. To minimize this risk you must
follow the installation instructions for cabinet
dimensions, trim assembly, and door stop angle.

Door Trim Pinch Point Hazard

WARNING

STEP 9 ADJUST DOOR SWING

NOTE: This refrigerator has a 3-position door stop.
When space does not allow the door to swing open
fully to 115°, you may change the door swing to a 90°
opening. A 130° door swing is available for standard
installation only. If used for flush installation, damage
will occur to wood panels. Skip this step if door
opening is satisfactory for your installation situation.
• Lift the grille panel to access the wire cover trim.
• Remove screws on both sides of the wire cover trim

and rotate off.

• Use pliers to unscrew door stop and reinstall into the

90° or 130° position.

• Reinstall the wire cover trim.

Remove

Wire Cover

Trim Screws

Pin Location

for 90°

Door Swing

Pin Location for

130° Door Swing -

Not for use with

Flush Installation

Pin Location

as Shipped

for 115°

Door Swing

«
...
33
34
35
36
37
...
»

Содержание ZIP360NH





















































Отзывы:

Нет отзывов

Похожие инструкции для ZIP360NH

Бренд: Jenn-Air Страницы: 80

Бренд: Igloo Страницы: 7

Бренд: Igloo Страницы: 10

Бренд: Igloo Страницы: 1

Бренд: Igloo Страницы: 1

Бренд: Zanussi Страницы: 20

Бренд: Zanussi Страницы: 28

Бренд: Zanussi Страницы: 20

Бренд: Zanussi Electrolux Страницы: 20

Бренд: BOMANN Страницы: 36

Бренд: Magic Chef Страницы: 7

Бренд: Chambers Страницы: 31

Refrigerator/freezer

Бренд: Tricity Bendix Страницы: 16

Бренд: Jenn-Air Страницы: 80

Бренд: Electrolux Страницы: 7

Бренд: Electrolux Страницы: 2

Бренд: KRAFT Страницы: 18

Бренд: Electrolux Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды