monofil 4451, Руководство по эксплуатации, Страница: 7 / 31

- 7 -
02 GENERAL SAFETY NOTES
2.1 Intended use
The operational safety of the supplied system is only guaranteed if it is used in accordance with its
intended purpose.
- The machine supplied is intended exclusively for filling pre-filled aerosol spray cans.
- Only undamaged aerosol cans are allowed to be filled. Check the cans for damages, especially for bulging.
- The recommended filling quantity (100 ml for a 400 ml aerosol can) must not be exceeded.
- Only fill aerosol cans that are intended exclusively for subsequent filling.
- Do not fill more than once.
- Only fill with approved substances. Approved substances are paints, primers and related substances such
as hardeners, converters or thinners.
The system may only be operated if it is in perfect working order.
- In case of malfunctions of the compressed air system, switch off the machine immediately, disconnect it from the
pneumatic supply and secure it against uncontrolled restarting. Immediately report and repair all faults and damages
displayed by the system or otherwise detected.
The following are not permitted:
- Operating the system in a defective condition
- Changing the connection requirements, operating conditions and performance data defined in the technical
documentation
- Changing or modifying the machine without prior approval by MONOFIL
- Smoking, eating or drinking while operating the machine
- Installed safety devices must be in place, properly installed and fully functional. They must not be changed in
their position, bypassed or disabled.
- Safety components such as limit switches, valeves and other control components must not be disabled.
- Persons under influence of alcohol, other drugs or medication that affect their ability ro react must not operate
or maintain the machine.
We strictly forbid improper use. In the event of damage, the responsibility remains with the operator
and cannot be transferred to the manufacturer.
2.2 Special operator obligations
- Every operator must prepare operating instructions.
- In accordance with BGV A3, the operator must ensure that the machine and the operating materials are
repeatedly inspected to maintain its proper condition.
- A qualified person is responsible for carrying out the inspections properly.