20
RYDIS
MR6550
User Manual
ENGLISH
■ Basic cleaning mode.
■ Without the indicator installed, the robot cleaner will just clean all open spaces.
With the indicator installed, the robot cleaner detects the signal from the indicator and will clean
the room where the signal is detected. (See the pages 28 - 31.)
■ While cleaning, if charging is needed, the robot cleaner will stop cleaning and move to the charger.
■ After each cleaning, empty the dust box. If the dust box remains full, the suction power may
deteriorate.
■ Cleaning efficiency and time may vary depending on the condition of obstacles such as carpets
etc on the floor.
01. Turn the power of the main body on.
02. Press the [START/STOP] button.
03. Automatic cleaning begins.
If you press the [Start/Stop] button after the product starts working, it stops cleaning.
When the cleaning is stopped and you press the [Start/Stop] button, the product will resume cleaning.
At this time, the previous cleaning operation will be ignored and the automatic cleaning will be newly
activated.
When automatic cleaning starts, the focused cleaning mode is on. If a certain period of time passes
or an obstacle is detected, the focused cleaning mode will turn off and the robot cleaner will start
moving in straight.
The robot cleaner may occasionally move along the wall and perform focused cleaning.
Basic cleaning
(Automatic Cleaning)
When dustcloth guard is installed to the bottom part of the robot cleaner, it is automatically switched
to the dustcloth cleaning mode. In this mode, the robot cleaner does not go to the carpet, foothold
or threshold.
Main body button
Main body button
Remote controller button
Remote controller button
or
OK
CHARGE
VACUUM
MODE
START/STOP
INTENSIVE
SHADOW
AUTO
MANUAL
MUTE
CORNER CL.
ROOM SEL.
MS
RESERVE
OK
CHARGE
VACUUM
MODE
START/STOP
INTENSIVE
SHADOW
AUTO
MANUAL
MUTE
CORNER CL.
ROOM SEL.
MS
RESERVE
