background image

9

Fig. 8.

Setting KM or MILE
Km and km/h is the dafault setting from the factory.
If you want to make a setting in mile take the meter out of the panel.
Turn off the meter by taking out one battery.
On the back side is a switch with two settings - 1 and ON. See fig. 9.
1 is equal to km and km/h and is the default setting.
ON is equal to mile and mph. Choose position and install the battery again.
Put the meter back again into the panel.

FUNCTION
Press any button or move the pedal to turn on the meter.
At the display for heart rate (HR) a 

 is lit which means that the meter is trying to find a pulse

signal from an external source (chestbelt with electrodes, our part.no 9339-91).
If the meter can not find such a signal this HR function is automatically turned of after 30
seconds. When the function is turned off the 

♥ 

symbol is not lit any more.

The heart rate function can be turned on again by preessing a button.

Timer starts automatically when pedals are moved. Meter values for Time, Distance and Calories
can be set to zero by pressing the RESET button for more than 2 seconds.
To get correct raedings for calories and watts the kp value on the electronic meter has to be set to
the same value as the workload that is the weight of the basket including the weights in it.
Example: The workload is 3 kg (weight basket 1 kg + 2 x 1kg weight). Press the kp button to the
left on the meter. The lower display window is now flashingand showing figures in kp. Increase
or decrease in steps of 0.1 kp by pressing the kp button(

!

) or the RESET button(

"

) until the

reading is corresponding with the actual or desired kp values (workload) from the weight basket.
After that press the CAL/WATT button to either show the CAL or WATT figures.
The watt reading in the display is depending on the pedalling speed. The watts can accordingly be
adjusted by increasing or decreasing the pedalling speed.
Calories are calculated all the time.

Do not expose the electronic meter to direct sunlight or extremely high temperature. Do not use
any dissolvents when cleaning. Use only dry cloth.

FITNESS COMPUTER

SPECIFICATIONS:

RPM:

0 - 199

pedalrev./min

HR:

50 - 240

bpm

TIME:

0:00 - 99.59

min:sek

SPEED:

0 - 99

km/h or mph

DISTANCE: 0.0 - 99.9

km or mile

FORCE

0.0 - 7.0

kp

CALORIES 0 - 999

kcal

WATT

0 - 7 x rpm

watt

Power supply:

  1.5 V x 2

AA(R6)

Storing temp.:

-10ºC - +60ºC

Operating temp.:

  0ºC  -  50ºC

Содержание Ergomedic 874 E


















Отзывы: