Monark 891 E Wingate Option, Руководство пользователя

Страница: 19 / 24

Freewheel sprocket
When replacing the freewheel sprocket remove frame
covers if necessary. Remove the chain according to
section ”Chain 1/2” x 1/8””.
Loosen the axle nuts and lift off the flywheel. Remove
the axle nut, washer, chain adjuster and spacer on the
freewheel side. Place the special remover (Art. No:
9100-14) in the adaptor and place the spacer and axle
nut outside. See
Fig: Special remover.
NOTE! NOTE: Do not tighten the axle nut completely.
It must be possible to loosen the adapter-sprocket half
a turn.
Replace sprocket-adapter and assemble the new parts
in reverse order according to the above.
The sprocket should be lubricated with a few drops of
oil once a year. Tilt the cycle to make it easier for the
oil to reach the bearing. See
Fig: Lubrication .
Monark 891 E/891 E Wingate Option
19
Fig: Special remover
(Art. no: 9100-14)
Fig: Lubrication
Fig: Hub assembly