Monark 891 E Wingate Option, Руководство пользователя

Страница: 10 / 24

5
4
2
3
1
Monark 891 E/891 E Wingate Option
10
Adjustment brake cord tension 891 E
At first check that the brake cord is lying correct on the
flywheel surface, see
Fig: Brake cord
and
Fig: Brake
device. Loosen the stop lever(2) from the tension
centre(1). Put 1 kg in the weight basket(4). Rotate
the flywheel by hand. The basket shall now lift up so
the distance to the flywheel is at least 150 mm /5.9"
and maximum 190 mm / 7.5". If this is not the case
the brake belt has to be loosened or tightened a little
at the tension centre. Lock the weight basket in its
upper position with the stop(3) and after that loosen
the lock washer(5) somewhat so that the cord length
can be adjusted. If the basket is too low, shorten the
belt somewhat. If the basket is too high, lengthen the
cord somewhat. Then lock the clamp again and check
that the basket rises between 150 mm/5.9" and 190
mm/7.5" when the wheel is rotated.
NOTE!
To receive correct workload it is important to place the
weight basket according to the description above. If
the basket hangs too low it may touch the flywheel. If
the basket is too high, wrong workload may obtains.
Fig: Brake device
1) Tension center
2) Stop lever
3) Stop
4) Weight basket (0,1 kg)
5) Cord bracket
Fig: Brake cord