background image

Service check and Maintenance

It is important to carry out a regular service on your 
ergometer, to ensure it is kept in good condition.

Service action:

We  recommend  isopropyl  alcohol  to  disinfect  the 

• 

surface of the bike. Use a damp but not wet cloth to 
clean the surface you wish to disinfect.
Always  keep  the  bike  clean  and  well  lubricated 

• 

(once a week).
Periodically wipe the surface with a rust preventative, 

• 

especially when it has been cleaned and the surface 
is  dry.  This  is  done  to  protect  the  chrome  and 
zinc parts as well as the painted parts (4 times per 
year).
Check  now  and  then  that  both  pedals  are  firmly 

• 

tightened. If not the threading in the pedal arms will 
be damaged. Also check that pedal arms are firmly 
tightened  on  the  crank  axle,  tighten  if  necessary. 
When the Ergometer is new it is important to tighten 
the  pedals  after  5  hours  of  pedalling  (4  times  per 
year).
Check  that  the  pedal  crank  is  secure  to  the  crank 

• 

axle (4 times per year).
Be  sure  that  the  pedals  are  moving  smoothly,  and 

• 

that the pedal axle is clear of dirt and fibres (4 times 
per year).
When cleaning and lubricating be sure to check that 

• 

all screws and nuts are properly tightened (twice a 
year).
Check that the chain is snug and there is no play in 

• 

the pedal crank (twice a year).
Check that pedals, chain and freewheel sprocket are 

• 

lubricated (twice a year).
Be sure that the brake belt does not show significant 

• 

signs of wear (twice a year).
Check  that  the  handlebars  and  seat  adjustment 

• 

screws are lubricated (twice per year).
Be  sure  that  all  moving  parts,  crank  and  flywheel 

• 

are working normally and that no abnormal play or 
sound exists. I.e. play in bearings causes fast wearing 
and with that follows a highly reduced lifetime.
Check that the flywheel is placed in the center and 

• 

with plane rotation.

Service

Warning

Make  sure  the  voltage  indicated  on  the  appliance 
corresponds to the local mains voltage before making 
connections.

Warranty

EU countries - Private use

If you are a consumer living in the EU you will have 
a  minimum  level  of  protection  against  defects  in 
accordance with EC Directive 1999/44/EC. In short, 
the directive states for that your Monark Dealer will 
be liable for any defects, which existed at the time of 
delivery. In case of defects, you will be entitled to have 
the defect remedied within a reasonable time, free of 
charge, by repair or replacement.

EU countries - Professional use

Monark Exercise products and parts are guaranteed 
against  defects  in  materials  and  workmanship  for  a 
period of one year from the initial date of purchase 
of  the  unit.  In  the  event  of  a  defect  in  material  or 
workmanship  during  that  period,  Monark  Exercise 
will repair or replace the product. Monark Exercise will 
not, however, refund costs for labour or shipping. 

Other countries

Monark Exercise products and parts are guaranteed 
against  defects  in  materials  and  workmanship  for  a 
period of one year from the initial date of purchase 
of  the  unit.  In  the  event  of  a  defect  in  material  or 
workmanship  during  that  period  above,  Monark 
Exercise  will  repair  or  replace  (at  its  option)  the 
product.  Monark  Exercise  will  as  above  for  labour 
or shipping.

Note that the text about service and maintenance is 
universal  and  that  all  parts  may  not  be  relevant  to 
your bike. 

Monark 891 E/891 E Wingate Option

16

Содержание 891 E Wingate Option

























Отзывы: