12
and will indicate
VRPM
(Virtual RPM) on the lower line. The knob
adjusts the virtual speed in RPM, counterclockwise to increase and
clockwise to decrease.
4.0 MENU
The Menu allows settings of basic setup options – displayed
decimal places, backlight on or off, positive or negative edge for
input and output signal and blanking. The menu is entered by
pressing the MENU button and using the knob to scroll through the menu
options as described below. The top display line shows
. To select a
menu option, press the MENU button again.
4.1 Decimal Places
Sets the number of decimal places shown on the display for numeric.
After pressing the
MENU
button rotate the knob until the display bottom
line shows
DECPT
and press the
MENU
button again. The top line of the
display will show the number of decimal places (2, 1, none) selected by
rotating the knob. Press the
MENU
button to select, then any other key
to exit. The display will show
DONE
and return to the normal readout.
4.2 Backlight
Enables the display backlight to be turned on or off. After pressing the
MENU button rotate the knob until the display bottom line shows BLITE
and press the MENU button again. The top line of the display will show
or
selected by rotating the knob counterclockwise (yes) or clockwise
(no). The backlight will turn on and off accordingly. Press the MENU
button to select, then any other key to exit. The display will show DONE
and return to the normal readout.
4.3 Input Pulse Edge
Sets the input pulse edge that triggers the stroboscope. After pressing the
MENU
button rotate the knob until the display bottom line shows
INPUT