5
To enter the MENU:
1. Press the
ALT FUNCTION
button and then the
MENU
button.
2.
SETUP
and the menu option will be displayed.
3. Turn the tuning knob to cycle through the main menu options.
4. Once the desired menu option is displayed, press the
MENU
button to
select it. Press any other button to cancel.
5. Turn the tuning knob to edit the menu option setting.
6. Press the
MENU
button to save your changes. Press any other button
to cancel.
7. Press any button other than MENU to exit the Main Menu.
8.
DONE
will be displayed.
Below is a list of the menu items:
DECPT
Decimal Point (none, 1 or 2)
BLITE
Backlight (Yes=On or No=Off)
INPUT
Positive (pos) or Negative (neg) Edge for Input Signal
OUTPT
Positive (pos) or Negative (neg) Edge for Output Signal
4.0 OPERATION
To turn on the stroboscope, depress and hold the trigger. The trigger may
be locked in position using the side locking button. To lock the stroboscope
on, depress the trigger as far as it will go and then press the locking button.
Once the locking button is set you may release the trigger and the trigger
will be held in place. To unlock the stroboscope, simply depress the trigger
and then release.
Note:
Unit must power down completely (
OFF
will be displayed and then
disappear) before unit will power on again. This is normal operation.
