16
When charging, the strobe will indicate
CHRGE
in the bottom right of
the display. The recharger will fast charge the batteries for about 4-5
hours and then trickle charge the batteries.
Allow the recharger to charge the batteries until the display shows
DONE
for peak battery life performance. If the batteries are not
charged to 100% regularly, the batteries will lose capacity.
7.3 Battery Disposal
Prior to disposing of the battery-powered strobe, the user must
remove the Nickel-Metal Hydride batteries. To do this, remove the
lens, reflector and lamp as detailed in the Lamp Replacement section.
This will expose four (4) screws that must be removed so the reflector
housing can be dismantled. There are four (4) additional screws in the
case half opposite the input and output jacks that must be removed.
The case halves can now be separated, exposing the batteries. Unplug
the batteries from the circuit board. The batteries should be sent to a
recycling center or returned to the factory. The rest of the parts may
now be disposed of.
