13
2.
Hold the lamp with a cloth between your forefinger and thumb and
rock it back and forth gently while pulling out. Do not attempt to rotate
the lamp. The lamp is socketed and will come out easily when pulled
straight out.
WARNING
Do NOT touch the new lamp with bare fingers.
3.
Using a lint-free cloth, insert the new lamp by gently rocking the lamp
while pushing it into place (see Figure 4). Make sure the lamp is in
straight and centered in the reflector hole.
Note:
Older Nova-Strobes and flashtubes may have a red dot (
•
) on the
flashtube and connector to indicate polarity. If present, match red to red.
CAUTION
Do NOT allow the reflector to contact the lamp.
4.
Reinstall the reflector and then position the front lens in place
matching up the notches on the lens with the two small tabs on the
housing to prevent lens rotation (see Figure 4). Push the tabs on the
front rim outward and press the lens into place.
Figure 4 Lamp Replacement
Notches
