2
Below the display are six membrane buttons which control the
operation of the Stroboscope. They are:
Multiply Flash Rate by 2
ALT Function - Starts Menu (see section 3.0)
H
old when powering up to show all segments, then Rev #
and display test
Divide Flash Rate by 2
Hold when powering up to reset factory defaults
DISPLAY/TACH
Toggles display between RPM and RPS
ALT Function
—Toggles Tach Mode (flashing) on/off
INPUT/MEMORY
Manually toggles between Internal and External Modes
ALT Function
—Memory, reads and stores 9 preset flash
rates
ALT FUNCTION
Activates Alternate Function for buttons (lower section) and
knob
PHASE DELAY
In Internal Mode, toggles between normal flash rate adjust
and “phase” adjust
The ALT FUNCTION button toggles
ALT.
in the display. When
ALT.
is
displayed, the buttons will perform their secondary function listed in
the lower section of each button. It also changes how the tuning knob
works.