Monaco HOLIDAY RAMBLER 2013, Руководство пользователя

Страница: 99 / 142

96
Eq
UIPME
nT
- 5
2013 HOLIDAY RAMBLER
Dinette Table Conversion
The dinette
can be used as a
bed or a dinette.
A fold up
portable table is
used and should
be properly
stored when in
transit.
To Use The Bed:
Remove straps from each section and
fold all legs out.
Lower bed sections and fold cushions
out to form the bed.
Reverse procedure
to store bed. Loosen
strap adjustments,
fasten straps and pull
straps tight to hold
bed secure.
To Use The Dinette:
Remove retaining straps from each
section and fold out bottom cushion
legs of each section only.
Lower each section bottom cushion to
rest on the legs.
Rotate inner cushions to form the back
rests.
Locate the table, fold the legs out and
adjust the leg extensions at a desired
height. Inside leg should be in a shorter
adjustment to rest on the side ledge of
the floor.







Reverse procedure to store dinette
sections. Loosen strap adjustments,
fasten straps and pull straps tight to
hold dinette sections secure.
Fold over the bottom portion of the bed
that will form the seat.
Lift the front portion of the lifting bar
to raise and lower the hide-a-bed back
into the sofa base.
Replace the seat cushions.
ExpANDABLE BED
The expandable bed sets up quickly. The
material is secured to the recreational vehicle
for easy stowing.
To Open the Bed:
Unlock and
open latches.
Lower the bed
platform.
Work tent
material over
bar hoop then
place hoop
in upright
position.
Secure end flap to hook and loop
material (Velcro®).
Fold side flaps down to cover end flap.
Use hook and loop material to secure.
Carefully stretch side flap securing ties
across bottom of bed platform hooking
into eyelets of other side flap.
Unfold mattress.
CAUTION:
Weight limit 750 lbs.











CAUTION:
Retract the expandable bed in
inclement weather. Severe damage to
the bed, mattress, and/or recreational
vehicle may result. If wind or extended
periods of rain are expected, retract
the bed and secure for travel. Storm
related damage is not covered under
warranty.
To Close the Bed:
Remove and stow bedding.
Fold mattress.
Carefully remove securing ties from
side flap and let hang.
Work tent material over bar hoop
towards interior.
Stow end flap securing ties under
mattress.
Lower bar hoop with mattress placed
towards top of bed platform.
Raise bed platform. Ensure material,
ties and mattress is clear of mating
surfaces.
Close and lock latches.
NOTE:
Refer to awning Care and Mainteance
for washing instructions.








031101
031099
Fold weat to convert
020334m
Expandable Bed Latch
031154d
A = Hook and Loop
B = Side Flap
C = End Flap