89
Eq
UIPME
nT
- 5
2013 HOLIDAY RAMBLER
Locks:
The locking
cylinder requires slight
lubrication on an annual
basis, or as needed. Use a
graphite based lubricant
specially formulated for
locks. The upper lock is
the privacy lock, the lower
lock is the deadbolt lock.
Applying a light coat of
white lithium grease to
the face of the lock bolt to
facilitate operation.
Hinges:
The hinges for the door require
slight lubrication annually, or as needed, with
any high-quality, dry spray lubricant.
Screen Door - Adjusting:
The screen door
can be adjusted to sit flush in the door jam.
This requires two separate adjustments. The
first adjustment made is at the screen door
latch/catch itself. Loosen the two Phillips
screws holding the latch to the door to permit
vertical adjustment. Move the latch far
enough to catch on the striker mounted at the
door frame. Tighten both screws. The striker
mount on the door frame permits horizontal
adjustment. Again, loosen the two Phillips
screws holding the striker assembly. Move
the striker to center the latch and tighten the
Phillips screws in place.
Screen Door - Changing the Slider:
Place the slider
in the center. Pull
from the center
of the slider, it
will bow enough
to allow easy
removal. To
re-install, reverse
this procedure.
Install the upper left corner first and pay
attention to the location of the stop tabs.
SLIDEOuT
The slideout is operated by a 12 Volt DC
electric motor. There are two different styles
of mechanical operation depending upon
floor plan. One system is a “below floor”
mechanism. The other system is an “above
floor” mechanism. The slideout systems are
adjusted at the factory for proper operation.
Before Operating the Slideout System:
Confirm there is enough clearance
inside/outside the recreational vehicle
for the room to extend/retract.
The battery must be fully charged and
connected to the electrical system.
Open a window or vent to equalize
pressure during slideout operation.
Ensure people, pets and objects are
clear of the slideout room path.
Firmly latch all cabinet doors and close
drawers. Damage to the doors, drawers
and fascia can occur.
CAUTION:
Confirm there is five or more feet of
clear space outside of the recreational
vehicle before extending the slideout
room. Be sure there is sufficient
clearance the inside the recreational
vehicle before retracting the slideout
room. Check that all cabinet doors
are securely closed before extending
or retracting the slideout room. Clean
the floor before retracting the slideout
room. Dirt or grit that is trapped
under slideout room can damage the
floor covering.
CAUTION:
Do not operate the slideout room when
the battery has been removed from
the recreational vehicle. Operating the
slideout by using only the converter
may damage the slideout electrical
components. Continuous operation
of the slideout room can drain the
battery and damage the slideout motor
from overheating. Do not move the
recreational vehicle with the slideout
room extended.
CAUTION:
Do not leave the slideout in the
extended position during severe
weather. Conditions such as high
winds or heavy rain may cause
damage with the slideout room
extended. Do not extend the slideout
room in snow, sleet, ice or freezing
rain. This can damage the slideout
room or mechansim. In the event the
slideout room is extended in snow,
sleet, ice or freezing rain conditions,
it is recommended to clear the roof
of the slideout room and ensure free
movement prior to retracting the
slideout.
020131c
Strike Plate
020132b
Screen Door Latch
Slider
031316
Содержание HOLIDAY RAMBLER 2013
