manualshive.com logo in svg

Monaco Cayman 2006, Руководство пользователя

Monaco Cayman 2006 - Руководство по эксплуатации для бесплатного скачивания. Найдите все необходимые инструкции на manualshive.com. Получите доступ к подробным сведениям о вашем устройстве, чтобы использовать его на полную мощность. Это руководство поможет вам раскрыть все возможности вашего Monaco Cayman 2006.

Поделиться
Скачать
background image

76  •  Section 3 — Exterior & Interior Care  

 

 

Cayman 2006

Fabric Cleaning Codes

The codes listed below detail the cleaning instructions recommended by the fabric manufacturing industry. 

Refer to the fabric specifi cation charts (located on the following pages) for particular fabrics. Follow the 
recommended cleaning code for each particular fabric. 

If a spill occurs, blot the moisture as quickly as possible. 

DO NOT 

use soap and hot water as this may set a 

stain. Clean the spot as soon as possible.  

“W”

 - Clean this fabric with the foam only of a water-based cleaning agent to remove the overall soil. Many 

household cleaning solvents are harmful to the color and life of a fabric. Cleaning only by a professional 
furniture cleaning service is recommended. To prevent overall soil, frequent vacuuming or light brushing to 
remove dust and grime is recommended.

“S”

 - Clean this fabric with pure solvents (petroleum distillate-based products such as Energine, Carbona, 

Renuzit, or similar products may be used) in a well ventilated room. Cleaning only by a professional 
furniture cleaning service is recommended.

CAUTION:
Use of water-based or detergent-based solvent cleaners may cause excessive shrinking. 
Water stains may become permanent and unable to be removed with solvent cleaning 
agents. Avoid products containing Carbon Tetrachloride as it is highly toxic. To help 
prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is 
recommended.

“S/W”

 - Clean this fabric with the foam only of a water-based cleaning agent or with a pure solvent in a well 

ventilated room (petroleum distillate-based products such as Energine, Carbona, Renuzit, or similar products 
may be used). Cleaning only by a professional furniture cleaning service is recommended. To help prevent 
overall soiling, frequent vacuuming or light brushing to remove dust and grime is suggested.

“P” -

 The article is resistant against perchlorethene, cleaning benzine 

(spirit), white spirit, R-11 and R-13.

“Dry Clean Only” -

 Cleaning only by a professional dry cleaner or furniture 

cleaning service is recommended for this fabric. 

“X” -

 Vacuum only. A non-metallic brush may be used.

*Machine Washing for 100% Polyester:
“Wash Cycle” -

 Use synthetic setting and high water level with mild agitation. A mild soap or detergent in 

water not to exceed 160º F. No bleach or fabric softener.

“Drying” -

 Use low temperatures, a synthetic setting of 85º F to 90º F maximum should be used. 

DO NOT

 

exceed three to fi ve minutes time on the synthetic cycle. If washed at 160º F, the maximum temperature which 
can be used to dry is 140º F. Hang or fold immediately after drying.

“Finishing” -

 If necessary, press as following:

• Iron on low setting (275° F) with damp cloth or steam iron using a dry press cloth.
• Grid Head press for short intervals with minimum steam. 

DO NOT

 lock the head.

• Flat bed press dampened drapery using cloth covering.
• Avoid prolonged contact with heat.

Содержание Cayman 2006













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cayman 2006

NewMar BAY STAR 2017 Owner'S Manual preview
BAY STAR 2017
Бренд: NewMar Страницы: 116
Opus OFC195C Owner'S Handbook Manual preview
OFC195C
Бренд: Opus Страницы: 48
Jayco 2014 PINNACLE TOWABLES User Manual preview
2014 PINNACLE TOWABLES
Бренд: Jayco Страницы: 124
Outdoors RV 2013 Creek Side Owner'S Manual preview
2013 Creek Side
Бренд: Outdoors RV Страницы: 101
GBM Cruise Air XL Owner'S Manual preview
Cruise Air XL
Бренд: GBM Страницы: 44
Jayco Baja J/TRAX Owner'S Manual preview
Baja J/TRAX
Бренд: Jayco Страницы: 101
Winnebago Minnie Winnie Owner'S Manual preview
Minnie Winnie
Бренд: Winnebago Страницы: 74
Thor Motor Coach Four Winds 29G Manual preview
Four Winds 29G
Бренд: Thor Motor Coach Страницы: 11
Thor Motor Coach 2009 Mandalay Owner'S Manual preview
2009 Mandalay
Бренд: Thor Motor Coach Страницы: 190
Hobby DE LUXE 2018 Operating Manual preview
DE LUXE 2018
Бренд: Hobby Страницы: 185

Бренды по названию

Популярные бренды

Загрузить еще бренды