manualshive.com logo in svg

Monaco Cayman 2006, Руководство пользователя

Monaco Cayman 2006 - Руководство по эксплуатации для бесплатного скачивания. Найдите все необходимые инструкции на manualshive.com. Получите доступ к подробным сведениям о вашем устройстве, чтобы использовать его на полную мощность. Это руководство поможет вам раскрыть все возможности вашего Monaco Cayman 2006.

Поделиться
Скачать
background image

96  •  Section 3 — Exterior & Interior Care  

 

 

Cayman 2006

• While the engine is running check the operation of headlights, taillights, turn signals, back-up lights, 

license plate light and emergency fl asher. Operate the dash air conditioner. If the air conditioner does not 
work, or the compressor makes an unusual noise, have the system checked by a qualifi ed air conditioner 
technician.

• Shut the engine down. Adjust or add fl uids as necessary. 

Inspect

 the engine for fl uid leaks. Look under the 

motorhome for fl uid leaks.

• Drain, sanitize and fl ush the fresh water system as outlined in the 

Water Systems - Section 6

. 

Inspect

 the 

sewer drain hose and connections for leaks. Replace if necessary.

• Operate all faucets and fi xtures in the fresh water system. Run a suffi cient amount of fresh water through 

all the water lines and faucets to thoroughly purge any potable antifreeze from the fresh water system. 

NOTE:
Discard at least the first two trays of ice from the icemaker to ensure the ice does not contain 
traces of antifreeze or other contaminates. 

• Open cabinet doors and drawers. 

Inspect

 for water leaks at joints or fi ttings. Repair as necessary.

• Operate all 12 Volt DC lights and accessories. If something does not work there may be a bad 12 Volt 

circuit breaker or blown fuse.

• Install new batteries in battery operated safety detectors or devices. Test the Carbon Monoxide, LP-Gas 

and smoke detectors for proper operation.

• Check that the monitor panel is properly functioning.
• 

Inspect

 the 120 Volt AC electrical system which includes the power cord, inverter/converter, all outlets 

and exposed wiring. 

NOTE:
Prepare the generator for operation following the instructions in the Generator Manual.

• Start and run the generator.
• Confi rm that the batteries are charging. Operate the 120 Volt AC appliances and air conditioners. If an 

electrical item or appliance is not  properly functioning, contact the dealer or an authorized service center 
to have it evaluated.

• Have a qualifi ed technician 

inspect

 the LP-Gas system and perform an LP-Gas leak test. The leak test 

should also include an LP-Gas regulator adjustment (if needed). The test can also verify if the regulator is 
faulty and should be replaced. Have the LP-Gas tank 

inspected

.

• Operate each LP-Gas appliance. Observe all burner/pilot fl ames for proper color and size. 
• 

Inspect

 and clean the interior.

• Check the sealant around all roof and body seams and windows. Reseal if necessary.
• Lubricate all the exterior locks, hinges and latches with a graphite lubricant.
• Check the windshield wiper blade condition. Check the wiper/washer operation.
• Wash and wax the exterior. Check the body for scratches or other damage; touch up or repair as necessary. 

Flush the underside thoroughly.

• Run through the operational checks for steering, brakes, engine and transmission. Operate the motorhome 

slowly during these checks to allow suffi cient circulation of fl uids and resetting of the components.

• If desired, have the dealer or repair center double-check preparation to make necessary adjustments and/or 

correct defects.

Содержание Cayman 2006













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cayman 2006

Tiffin Motorhomes 2011 Phaeton Owner'S Manual preview
2011 Phaeton
Бренд: Tiffin Motorhomes Страницы: 173
ZENEC Z-N966 Navigation User Manual preview
Z-N966
Бренд: ZENEC Страницы: 82
forest river 2013 Shasta Owner'S Manual preview
2013 Shasta
Бренд: forest river Страницы: 50
Bailey Orion Owner'S Manual preview
Orion
Бренд: Bailey Страницы: 102
Bailey Approach Owner'S Manual preview
Approach
Бренд: Bailey Страницы: 110
Highland Ridge RV 2015 Owner'S Manual preview
2015
Бренд: Highland Ridge RV Страницы: 120
Highland RIDGE RV Owner'S Manual preview
RIDGE RV
Бренд: Highland Страницы: 155
Fleetwood Americana Laramie 1991 Owner'S Manual preview
Americana Laramie 1991
Бренд: Fleetwood Страницы: 64
Fleetwood Discovery 2004 User Manual preview
Discovery 2004
Бренд: Fleetwood Страницы: 98
Fleetwood 2005 Cheyenne Owner'S Manual preview
2005 Cheyenne
Бренд: Fleetwood Страницы: 63
Fleetwood American Eagle User Manual preview
American Eagle
Бренд: Fleetwood Страницы: 114
Fleetwood American Eagle 2006 Owner'S Manual preview
American Eagle 2006
Бренд: Fleetwood Страницы: 118
Fleetwood 2010 Icon Owner'S Manual preview
2010 Icon
Бренд: Fleetwood Страницы: 94
Fleetwood 1994 Tioga Montara Owner'S Manual preview
1994 Tioga Montara
Бренд: Fleetwood Страницы: 52
Fleetwood 1994 Bounder User Manual preview
1994 Bounder
Бренд: Fleetwood Страницы: 52
Fleetwood 2004 Flair Owner'S Manual preview
2004 Flair
Бренд: Fleetwood Страницы: 92
Fleetwood 1993 TIOGA Arrow User Manual preview
1993 TIOGA Arrow
Бренд: Fleetwood Страницы: 52
Fleetwood 1994 Flair Diesel Owner'S Manual preview
1994 Flair Diesel
Бренд: Fleetwood Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды