manualshive.com logo in svg

Monaco Cayman 2006, Руководство пользователя

Monaco Cayman 2006 - Руководство по эксплуатации для бесплатного скачивания. Найдите все необходимые инструкции на manualshive.com. Получите доступ к подробным сведениям о вашем устройстве, чтобы использовать его на полную мощность. Это руководство поможет вам раскрыть все возможности вашего Monaco Cayman 2006.

Поделиться
Скачать
background image

Cayman 2006 

 

 

 

 

Chassis Information — Section 10  •  225

CHASSIS - INTRODUCTION

This section contains information and instruction regarding various components of the motorhome chassis. 

Follow the guidelines and procedures to help understand and operate the motorhome. Complete instructions for 
engine and transmission are located in their respective operators manual included in the Owner’s Information 
File Box.

WARNING:
When welding is involved for motorhome repair or modification, only qualified, experienced 
technicians should weld on the chassis. Improper welding procedures and materials 
may weaken the assembly or result in damage that is not obvious and may not cause an 
immediate problem or failure. Unauthorized modifications or repairs to the chassis could 
result in a forfeiture of warranty coverage. 

Due to the sensitive nature of the electronics on the chassis, the following precautions are 
required to protect electrical components in the motorhome chassis.

1. Disconnect the (+) positive and (-) negative battery connection.
2. Cover electronic control components and wiring to protect from hot sparks.
3. Disconnect the terminal plugs from the engine Electronic Control Unit located on the curb 

side of the engine block.

4. Disconnect all the plugs from the Allison Electronic Control Module and the Vehicle 

Interface Module (VIM), located in the electrical bay at the road-side front of the 
motorhome.

5. Disconnect the wiring from the alternator.
6. Do not connect welding cables to electronic control components. 
7. Attach the welding ground cable no more than two feet from the part to be welded.

The Roadmaster chassis design provides exceptional balance, handling and braking characteristics. The 

Roadmaster chassis is an engine and frame unit featuring an all steel frame design, providing greater structural 
integrity and uniform stress distribution. Incorporated in the Roadmaster chassis is the air suspension system, with 
four air bags and Monroe gas shock absorbers. This design provides the smoothest ride, best handling and trouble 
free service while delivering excellent drivability. The chassis also has a three-point hydraulic leveling system. 
The Roadmaster chassis design offers unsurpassed ease of maintenance and service.

The towing system rating incorporated in the construction of the frame is 7,000 lbs. towing and 700 lbs. 

tongue weight.

Roadmaster’s exclusive rail chassis, with air suspension, consists of front and rear axles with trailing links. 

A panhard bar on each axle controls side motion. Each axle mounts to the trailing links that are connected to the 
chassis. The suspension control arms attach to the frame through bushings, which require no lubrication. The 
preset suspension ride height automatically maintains proper suspension height throughout the load range. 

100168b

Содержание Cayman 2006













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cayman 2006

Karmann-Mobil DEXTER 580 2021-2022 Operating Manual preview
DEXTER 580 2021-2022
Бренд: Karmann-Mobil Страницы: 200
Fleetwood 1985 Jamboree Rallye Owner'S Manual preview
1985 Jamboree Rallye
Бренд: Fleetwood Страницы: 46
Girard Systems G-LINK Manual preview
G-LINK
Бренд: Girard Systems Страницы: 39
Jayco Kiwi Travel Trailer 2003 Owner'S Manual preview
Kiwi Travel Trailer 2003
Бренд: Jayco Страницы: 55
Winnebago Suncruiser 33V Operator'S Manual preview
Suncruiser 33V
Бренд: Winnebago Страницы: 122
Winnebago Minnie Winny 2004 Owner'S Manual preview
Minnie Winny 2004
Бренд: Winnebago Страницы: 122
Winnebago Impulse 24V User Manual preview
Impulse 24V
Бренд: Winnebago Страницы: 152
GBM Pursuit 1993 Owner'S Manual preview
Pursuit 1993
Бренд: GBM Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды