Momentum 61535671, Руководство пользователя

Страница: 22 / 27

C
20
Trampoline Safety Enclosure Assembly
Tie down the enclosure net
1. Tuck the lower end of the enclsure net into the inside of the trampoline
mat padding.
2. Take the long tie-down strap and feed one end through the mesh at
bottom of the enclosure net so the end of the strap is inside the net.
Move the end of the strap a little further across and feed the end of the
strap back through the outerside of the mesh.
3. Once on the outside of the net feed the end of the strap through
the ring straps on the trampoline mat.
4. Repeat steps 2-3 all the way around the trampoline until the two
ends of the strap meet again. Once the two ends meet pull the strap
taut and tie down ensuring there is minimal slack in the enclosure.
NOTE: Please make sure the warnings on pad should face the net door when you assemble the
safety mesh.
TIP!
1
One person should lift the pad ahead of
the person who is lacing the net to the mat.
ASSEMBLY TIP
A
Thread evenly using
appropiate holes.
B
Thread four holes/loops
then pull through.
Repeat until back to start.