Momentum 61535671, Руководство пользователя

Страница: 17 / 27

15
Trampoline Mat Assembly
Assemble the mat
IMPORTANT: Please follow the order of strap attachment in the below diagram. Failure to do so
may result in frame buckling.
1. Lay out the mat in the center of the assembled frame ensuring the
top is facing upwards.
2. Take the steel springs (part 10) and hook onto the rings at the edge of
the trampoline mat. Ensure the spring end with extra rounded hook
is attached onto the mat.
3. Take the supplied spring hook tool and pull the spring back until it
can hook into the aligning hole on the top rail. Be sure to follow the
order displayed in the diagrams below.
4. Continue until all the springs are hooked into the top rail.
4 1
2
3
!
Warning!
When attaching the springs, do not place your hands, arms, legs or any
other body part close to the connector points (i.e. joints connecting the
steel tubes). The connector points can become pinch points as the
trampoline springs tighten up. Wear heavy duty working gloves to
protect your hands from pinching by the springs and predictive goggles
to avoid injuries to the eyes. Be steady when installing the springs as it
can rebound and fly off if you inadvertently let go when not hooked
properly. Make sure no children are playing nearby when installing or
assisting in the assembly of the trampoline.
The number of triangle-rings sewn onto the mat is equal to the number
of holes on the frame. If you notice that you have miscounted a hole or
triangle-ring, remove and reinstall the springs as necessary while
maintaining an even distribution of tension as explained above.