Moller Medical Docon 7, Инструкция по эксплуатации

Страница: 30 / 74

Docon
®
7
Product description
Page 30 of 74
Additional equipment which is connected to the analogue and digital device
interfaces must demonstrably satisfy the relevant EN specifications (e.g. EN
60950 for data processing devices and EN 60601-1 for medical electrical de-
vices). Whoever connects additional devices to the signal input or output part,
is the system configurer and thus responsible for ensuring that the valid version
of EN 60601-1 is observed.
When connecting a LAN network, a suitable hub approved for medical use or
a galvanic isolation device approved for medical use is to be used.
Should you have any queries, please contact your distributor or the manufac-
turer's technical service.
3.7 User interface
The following section provides an overview of the Docon 7 user interface. Information on
settings can be found as of
page 45 .
Figure 22: Basic setting display on the Docon 7