Moller Medical Docon 7, Инструкция по эксплуатации

Страница: 26 / 74

Docon
®
7
Product description
Page 26 of 74
Figure 17: Docon 7 battery compartments
To remove the mixing scales from the case, firstly unlock the black rotating lever on the
front directly below the display (see
Figure 18 ). Then gently lift up the front of the Docon 7
and pull it toward you out of the case tray.
To position the Docon 7 correctly in the case again, place it in a tilted position of approx.
30 degrees with the rear pointing down into the tray. Push the blue flap on the rear of the
device into the designated recess (see
Figure 18 on the right). Finally, lower the front of the
Docon 7 and lock the lever. The device is now ready for operation again.
The sliding compartment on the rear of the case allows the batteries to be charged whilst
the case is closed. For this, open the rear sliding flap on the case and insert the power cord
directly into the Docon 7 power socket.
Figure 18: Docon 7 case fixation
Docon 7 table
The table is mounted directly on the transport case. It serves as a storage place for donation
utensils and also enables the Docon 7 mobile and the sealing handle to be placed in ap-
propriate holders. For this you additionally require the scanner holder, table assembly sys-
tem and tube holder.