Molectron EPM1000 Скачать руководство пользователя страница 11

Страница: 11 / 62

Features & Description

EPM1000 User’s Guide

Safety Information

Caution

! Warning

Review this safety information carefully to avoid injury and prevent
damage to this instrument or any instrument connected to it. There are
no user serviceable parts in the EPM1000. For Service, please see
Maintenance, Service, and Calibration.

This manual uses two terms to describe hazardous conditions: Caution
and Warning.

Warning indicates serious injury or death may occur.

Caution indicates possible damage to equipment.

Warnings:

• Use only the power cord specified for the EPM1000.

The grounding conductor of the cord must be con-
nected to earth ground.

• Do not operate the EPM1000 if its panels are removed

or any of the interior circuitry is exposed.

• Do not operate the EPM1000 in wet or damp condi-

tions or in an explosive atmosphere.

Cautions:

• Do not operate the EPM1000 from a power source

which applies more than the voltage specified.

• Do not apply a voltage outside the specified range to

any of the terminals.

• Use only the fuse type and rating specified for the

EPM1000.

• Provide proper ventilation to the EPM1000, particu-

larly near the ventilation slots in the back.

• Do not operate the EPM1000 with suspected failures.

Refer damaged units to qualified Molectron service
personnel.

• Never connect or disconnect a powered probe while

the EPM1000 is on. Damage could result to the probe,
the EPM1000 or both.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание EPM1000































































Результаты поиска

Содержание EPM1000

Отзывы:

Похожие инструкции для EPM1000

Бренды по названию

Популярные бренды

Molectron EPM1000, Руководство пользователя

Результаты поиска

Содержание EPM1000

Отзывы:

Похожие инструкции для EPM1000

Бренды по названию

Популярные бренды