Mohlenhoff ESK 180-110, Руководство пользователя

Страница: 4 / 20

4
ENG
Product Informations
Intended Use
Möhlenhoff Electric System Convectors are exclusively intended for heating
in closed rooms for covering remaining heat demands, or for the full hea-
ting of rooms in case of a corresponding heat demand.
The System Convectors from Möhlenhoff are high-quality and high-value
under-floor devices that are precisely manufactured with current and pre-
cise technology. The units are securely packed to prevent damage and wear
during shipment.
Through incorrect use or intentional misuse, the Electric System Convector
could pose a danger to the user or a third party.
The electric system convector is designed for installation in the floor area
(screed level or cavity floor level) and serves for cold air protection in front
of floor-level window facades, or as complete heating system in winter gar-
dens. The electric system convector is not a mobile room heating device;
after the installation it is a part of the building construction. Mains connec-
tion must be performed as fixed connection. Height adaptation is possible
by means of adjustment blocks. The convector is covered with a covering
grille which can be removed by hand, the ”designer roll grille”. The desi-
gner roll grille is fixed with roll grille protectors.
Product Description
The Electric System Convector ESK is used when the architectural situation
requires an economical and comfortable room heating system. For exa-
mple, the high glass façades of modern buildings make a cold-air barrier
necessary.
Möhlenhoff under-floor convectors in the ESK series are ideal for the fol-
lowing applications:
• rooms with quick-heating demand
• exhibition rooms
• living areas
• winter gardens
• restaurants
• foyers and entry-halls
• industrial areas
• office and administration buildings
Areas of Application
Möhlenhoff convectors in the ESK product line may not be used in
the following areas:
• in or near
areas with danger of explosion (Danger of explosion)
• in wet areas (Danger of malfunction)
• in areas with dusty or corrosive air (Danger of malfunction)
The Designer Roll-Up Grille is subject to availability. For safety re-
asons, the
Linear Grille may not be used in combination with the
Electric System Convector.