![Mohlenhoff ESK 180-110 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/mohlenhoff-0/esk-180-110/esk-180-110_manual_1823432016.webp)
16
ENG
Maintenance
Maintenance/Cleaning
Cleaning intervals
ESK
Execution: see
maintenance and
cleaning instructions
in months
Cover Grille
6
see point 1
Ventilation duct
6
see point 2
Heat exchanger
12
see point 3
Electrical voltage! Danger to life!
Perfom all maintenance and cleaning
work on system convectors only under absence of voltage, in particular
in case or moist or wet cleaning! For this, switch off the corresponding
fuse switches of the voltage supply.
Danger of injuries!
Ensure during maintenance and cleaning work that
no persons or animals step into or enter the open system convectors.
Danger of burns!
Be always very careful during maintenance and re-
pair work near the heat exchanger. The heat exchanger can become
very hot depending on its state of operation.
The following procedures (1 –3) can be performed by the end user:
1. Clean the Designer Grille
Dry:
Vacuum the Designer Grille at regular cleaning in-
tervals during normal cleaning.
Wet:
Loosen possible grille protectors with a No. 3 Allen
key as shown.
Designer Roll-Up Grille
: Roll the cover-grill up without bending or kinking.
• Clean in Washing Machine: The DR is washing machine safe evenly up
to a temperature of 60°C with normal (non-industrial strength) dish-
washer cleaner. After washing and drying,the grille can be replaced on
the convector trough and re-secured.
• Cleaning without Washing Machine: Remove the grille from the
convector and unroll in a place where it can be cleaned. For cleaning, we
recommend normal detergent and, if needed, a soft cleaning brush.
After washing and drying, the grille can be replaced on the convector
trough and re-secured.
2. Clean the Convector Trough
Remove the Designer Grille and, if needed, the filter. To clean the hand-accessi-
ble area of the trough, we recommend a dry dust cloth or broom. Hard to reach
places can be cleaned with a vacuum cleaner (a soft brush nozzle can be useful).
Difficult to remove dirt can be removed with a moist towel. Replace the filter, if
needed, and the Designer Grille.
Содержание ESK 180-110
Страница 18: ...18 ENG ...
Страница 19: ...19 ENG 8 D24 53 031 12 ESK 180 110 ...
Страница 20: ......