Mohawk TR-110, Руководство пользователя

Страница: 21 / 76

MOHAWK MODEL TR-110 & TR-120
21
MAINTENANCE PROCEDURES
DAILY
x
PERFORM PRE-OPERATION CHECK LIST.
x
REPORT ANY AND ALL EQUIPMENT
MALFUNCTIONS IMMEDIATELY.
x
CLEAN AND LUBRICATE ALL MOVING PARTS.
x
KEEP AREA AROUND THIS EQUIPMENT FREE
OF DIRT, OIL, SAND, SALT, WATER, ETC.
WEEKLY
x
WIPE CLEAN, THE CYLINDERS’ WIPER SEALS
AND THE BASE OF EACH POST TO REMOVE
WEEPING OIL AND DUST.
x
VERIFY FLUID LEVEL. WITH UNIT FULLY
LOWERED, LEVEL INDICATOR ON RESERVOIR
IS TO READ FULL. USE DEXRON III AS
REPLACEMENT FLUID.
MONTHLY
x
INSPECT ALL HYDRAULIC COMPONENTS FOR
LEAKS, AND DEFORMATION DUE TO WEAR OR
CORROSION.
x
TIGHTEN ALL FASTENERS AND HYDRAULIC
FITTINGS.
x
INSPECT ANCHOR CONDITIONS FOR ANY
POSSIBLE CORROSION AND INSPECT THE
FLOOR CONDITION FOR ANY SIGNS OF
FATIGUE OR CRACKS.
x
CLEAN AND LUBRICATE CHAINS WITH A
LIGHT CHAIN LUBRICANT. (DO NOT USE
HEAVY GREASE) INSPECT CHAINS FOR ANY
SIGN OF UNUSUAL OR EXCESSIVE WEAR.
SEMI- ANNUAL TRAINING
x
RE-QUALIFY ALL PERSONNEL IN THE SAFE
OPERATION OF THIS UNIT.
ANNUALLY
x
REPLACE AND RE-BLEED THE HYDRAULIC
FLUID. ALWAYS USE A CLEAN FUNNEL AND
FILTER.
x
REPLACE/CLEAN HYDRAULIC FLUID FILTER
ELEMENT.
x
INSPECT ALL FLANGE BEARINGS FOR
UNUSUAL OR EXCESSIVE WEAR.
x
PERFORM THE DAILY, WEEKLY, AND
MONTHLY MAINTENANCE.