Mohawk TR-110, Руководство пользователя, Страница: 12 / 76

MOHAWK MODEL TR-110 & TR-120
12
APPENDAGES
INSTALL THIS EQUIPMENT ON
CONCRETE ONLY
IF, FOR ANY REASON, A NEW CONCRETE SLAB
SECTION IS REQUIRED, THE MINIMUM THICKNESS,
STRENGTH, AND AGING ARE MANDATORY. FOR
YOUR
PROTECTION, CERTIFIED STRENGTH
DOCUMENTATION SHOULD BE OBTAINED FROM
THE FIRM WHO SUPPLIES THE CONCRETE
MIXTURE AT THE TIME OF THE POUR. SPECIAL
CONSIDERATION SHOULD BE MADE TO THE
JOINING OF THE EXISTING FLOOR AND THE NEW
SECTION BEING ADDED. CHECK WITH BUILDING
ARCHITECT. THE SUGGESTED SIZE OF THE NEW
CONCRETE SLAB SECTION IS IN THE, GENERAL
FLOOR REQUIREMENTS. AND / OR THE FLOOR
MODIFICATION DATA SHEET.
IMPORTANT NOTE
A
LEVEL FLOOR
IS SUGGESTED FOR A PROPER
INSTALLATION SITE AND WILL ENSURE LEVEL
LIFTING.
IF A FLOOR IS OF QUESTIONABLE SLOPE,
CONSIDER A SURVEY OF THE SIGHT AND / OR THE
POSSIBILITY OF POURING A NEW LEVEL
CONCRETE SLAB SECTION.
SIMPLY STATED, FOR
OPTIMUM LEVEL LIFTING, THE EQUIPMENT, AT
BEST, CAN LIFT ONLY AS LEVEL AS THE FLOOR
ON WHICH IT IS LOCATED... AND SHOULD NOT BE
EXPECTED TO COMPENSATE FOR DRASTIC FLOOR
SLOPE DIFFERENCES.
WARNING
ALL ACCESSORIES (I.E. LIFTING PADS, HEIGHT
ADAPTERS, JACKING BEAMS) SUPPLIED WITH
THIS LIFT ARE TO BE USED ON THIS LIFT ONLY.
ACCESSORIES FROM OTHER LIFTS ARE NOT
ACCEPTABLE AND COULD RESULT IN INJURY TO
THE USER AND DAMAGE TO THE UNIT.
WARNING
LOADING
OF THE JACKING BEAMS OR
COMBINATION OF JACKING BEAMS ABOVE THE
RATED CAPACITY OF THE LIFT ITSELF COULD
RESULT IN PERSONAL INJURY TO THE OPERATOR
AND/OR DAMAGE TO THE LIFT AND/OR VEHICLE.
THE LOAD RATING OF ANY JACKING BEAM OR
COMBINATION OF JACKING BEAMS ON THIS UNIT
MUST NOT EXCEED THE RATED CAPACITY OF THE
LIFT.
CAUTION
THE EQUIPMENT DESCRIBED IN THIS MANUAL
COULD
BE POTENTIALLY DANGEROUS IF
IMPROPERLY OR CARELESSLY OPERATED. FOR
THE PROTECTION OF ALL PERSONS AND
EQUIPMENT, ONLY COMPETENTLY TRAINED
OPERATORS WHO ARE CRITICALLY AWARE OF
THE
PROPER OPERATING PROCEDURES,
POTENTIAL DANGERS, AND SPECIFIC
APPLICATION OF THIS EQUIPMENT SHOULD BE
ALLOWED TO TOUCH THE CONTROLS AT ANY
TIME.
SAFE OPERATION OF THIS EQUIPMENT IS
DEPENDENT ON USE IN COMPLIANCE WITH THE
OPERATION PROCEDURES OUTLINED IN THIS
MANUAL ALONG WITH THE MAINTENANCE AND
INSPECTION PROCEDURES WITH CONSIDERATION
OF PREVAILING CONDITIONS.
THE EQUIPMENT DESCRIBED IN THIS MANUAL IS
NEITHER DESIGNED NOR INTENDED FOR ANY
APPLICATION ALONE OR IN CONJUNCTION WITH
ANY OTHER EQUIPMENT THAT INVOLVES THE
LIFTING OR MOVING OF PERSONS.
ALWAYS CONSULT THE VEHICLE LIFTING GUIDE
FOR THE PROPER LIFTING POINTS ON ANY
VEHICLE. THESE GUIDES ARE AVAILABLE FROM
THE VEHICLE MANUFACTURERS.
AFTER LIFTING THE VEHICLE TO THE DESIRED
HEIGHT, ALWAYS LOWER THE UNIT ONTO THE
MECHANICAL SAFETIES. THE FORMING OF GOOD
OPERATIONAL WORK HABITS WILL ELIMINATE
OVERSIGHTS IN THE USE OF PROVIDED SAFETY
DEVICES.