Mohawk TR-110, Руководство пользователя

Страница: 20 / 76

MOHAWK MODEL TR-110 & TR-120
20
PRE OPERATION CHECK LIST
TRAINED OPERATOR
x
THE OPERATOR MUST BE FULLY TRAINED
AND QUALIFIED TO SAFELY AND
EFFECTIVELY OPERATE THIS EQUIPMENT OF
THIS SPECIFIC MAKE AND MODEL.
ABSENCE OF OBSTRUCTIONS
x
THE TOTAL WORK AREA MUST BE FREE OF
ANY AND ALL OBSTRUCTIONS AND BE
GENERALLY CLEAN. (FREE OF OIL AND
DEBRIS )
VISUAL INSPECTION
x
THOROUGHLY INSPECT THE UNIT WITH A
TRAINED EYE, NOTING ANY PROBLEM AREAS.
INSPECT THE FLOOR AND THE ANCHORING
FASTENERS
AS WELL. REPORT ANY
QUESTIONABLE ITEMS.
NO LOAD PERFORMANCE CHECK
x
ALL MECHANICAL SAFETIES OPERATE
PROPERLY AND CONSISTENTLY.
x
NO EXTERNAL FLUID LEAKS.
x
NO BLEED DOWN.
x
EFFORTLESS AND SIMULTANEOUS
MOVEMENT.
x
LEVEL LIFTING.
x
CONTROLS FUNCTION PROPERLY.
x
ALL SAFETY MECHANISMS FULLY
FUNCTIONAL.
PREVIOUS DAY'S OPERATION REPORT
x
VERIFY WITH SUPERVISOR THAT THERE WERE
NO PROBLEMS EXPERIENCED DURING THE
PREVIOUS DAY'S USAGE. IF THERE WERE ANY
PROBLEMS, VERIFY THAT ALL NECESSARY
REPAIRS HAVE BEEN COMPLETED.
LIFTING PROCEDURES
PRE-OPERATION & VEHICLE
POSITIONING
x
PERFORM PRE-OPERATION CHECK LIST ITEM
BY ITEM.
x
POSITION THE VEHICLE ONTO THE UNIT SO
THAT ALL TIRES ARE SECURELY ON THE
TRACKS. CENTER THE VEHICLE SO THAT THE
WEIGHT IS DISTRIBUTED EVENLY FORE AND
AFT.
x
PLACE THE WHEEL CHOCKS IN A POSITION SO
THAT THE VEHICLE WILL BE SECURE ON THE
UNIT.
FIGURE 13
TO RAISE
x
INSPECT THE LIFTING AREA TO INSURE THAT
ALL PERSONNEL AND DEBRIS HAVE BEEN
CLEARED FROM THE LIFTING AREA.
x
TURN ON THE UNIT (IF NOT ALREADY ON).
x
PRESS THE UP BUTTON AND RELEASE WHEN
DESIRED ELEVATION IS ACHIEVED WHILE THE
PARK BUTTON IS ILLUMINATED.
x
PRESS THE PARK BUTTON TO LOWER THE LIFT
SUPPORTS ONTO THE MECHANICAL LOCKS.
NOTICE:
ALWAYS LOWER THE UNIT ONTO THE
MECHANICAL
SAFETY LOCKS BEFORE
BEGINNING WORK ON VEHICLES.
TO LOWER
x
INSPECT THE LIFTING AREA TO INSURE THAT
ALL PERSONNEL AND DEBRIS HAVE BEEN
CLEARED FROM THE LIFTING AREA.
x
RAISE UNIT APPROXIMATELY TWO INCHES.
x
PRESS THE DOWN BUTTON AND LOWER UNIT
TO THE DESIRED WORKING HEIGHT OR ALL
THE WAY DOWN TO THE FLOOR.