manualshive.com logo in svg

MOGAS C Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 25 / 31

Поделиться
Скачать
MOGAS C Series Скачать руководство пользователя страница 25

ESI-6121 Rev D   © Copyright 03/2022 MOGAS Industries, Inc.   

www.mogas.com

ESI-6121 Rev D   © Copyright 03/2022 MOGAS Industries, Inc.  

 www.mogas.com

48

49

Re-Assembly

Re-Assembly

FINAL PACKING RING

If there is enough depth for the second anti-extrusion 
ring 

09B

 to fit flush in the pocket, install the anti-

extrusion ring 

09B

. 

If there is not enough depth for the second anti-
extrusion ring 

09B

 to fit flush in the pocket, use 

the gland flange 

07

 to compress the packing rings 

enough to fit the second anti-extrusion ring 

09B

 flush 

into the pocket. Make sure scribe line of stem is lined 
up with scribe line of packing gland.

Apply anti-seize compound onto gland studs 

12

 and 

gland nuts 

15

.

Install the gland nuts 

15

, tightening all nuts evenly 

until there is enough depth for the second anti-
extrusion ring to fit flush into the pocket.

Once this is accomplished, remove the gland nuts 

15

 

and the gland flange 

07

.

Install the second anti-extrusion ring 

09B

.

07

15

09B

 10

INSTALL PACKING RINGS

Note:

Applying a spray lubricant to packing ring surfaces may ease the 
installation process.

Install the rings one at a time (one anti-extrusion ring 

09B

 first, then each stem packing ring 

09A

, followed 

lastly by the second anti-extrusion ring 

09B

) using 

the gland flange 

07

 as a packing tool to stuff each 

packing ring all the way down against the previous 
ring. 

Make sure scribe line of stem is lined up with scribe 
line of packing gland.

09A

07

 9

CHECK POCKET DEPTH 

Before installing the second anti-extrusion ring 

09B

 

ensure there is enough depth for the anti-extrusion 
ring to fit flush in the pocket.

Содержание C Series
































Отзывы:

Нет отзывов