MOGAS C Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 31

MOGAS C Series Скачать руководство пользователя страница 14

ESI-6121 Rev D © Copyright 03/2022 MOGAS Industries, Inc.

www.mogas.com

ESI-6121 Rev D © Copyright 03/2022 MOGAS Industries, Inc.

www.mogas.com

26

27

These procedures apply to hydraulic, pneumatic
and worm gear actuation supplied by MOGAS or a
MOGAS authorized distributor. Otherwise, refer to the
actuator manufacturer’s manual for specific operator /
actuator removal procedures.

Note:

Valve item numbers shown in

bold

correspond with items shown in the

Valve Item Reference Number, Actuator Adaption

section (pages 6

and 7) of this document.

CAUTION!

It is

extremely important

to follow these steps to

ensure maximum valve performance.

THIS WILL AFFECT THE VALVE WARRANTY.

!

REMOVE BOLTING

Remove bolts

18

holding actuator to mounting flange

(or mounting flange adapter

51

, if provided).

LIFT ACTUATOR

Lift the actuator straight up and off the mounting
flange

14

(or mounting flange adaptor

51

).

CAUTION!

The actuator must not be re-oriented without
removal from the valve. This prevents 180° rotation
of the ball and assures the mate-lapped ball and
seat surfaces match. (See page 53, step 16 for
matching clarification.) Seat leakage may occur
when the ball and seat surfaces are not matched
per the engineered design).

THIS WILL AFFECT THE VALVE WARRANTY.

!

ROTATE ACTUATOR

After the actuator is removed, rotate the actuator to
the desired position.

Note:

As a standard practice, MOGAS adaption is designed to be rotated in 90°
increments.

REMOVE STEM ADAPTOR

Remove stem adaptor

13

(if present) by lifting straight

up and off the stem

05

, taking care to remove keys

06

if necessary.

STEM ADAPTOR POSITION

Verify the position of the stem adaptor

13

, if present.

If the slot or keyway does not match the slot or
keyway in the actuator, the stem adaptor

13

must be

rotated as well.

REMOVE MOUNTING FLANGE ADAPTOR

If mounting flange adaptor

51

is present, it must be

removed.

Remove nuts

24

and hex head screws

25

holding the

mounting flange adaptor

51

to the valve mounting

flange

14

.

Lift the mounting flange adaptor

51

straight up and off

the valve mounting flange

14

.

Note:

Rotating the stem adaptor may require removal of the mounting flange
adaptor, if present.

18

51

51

13

51

13

Rotate Operator

Actuator Adaption

Rotate Operator

Actuator Adaption

1

2

3

4

«
...
12
13
14
15
16
...
»

Содержание C Series
































Отзывы:

Нет отзывов