MOGAS C Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 31

MOGAS C Series Скачать руководство пользователя страница 17

ESI-6121 Rev D © Copyright 03/2022 MOGAS Industries, Inc.

www.mogas.com

ESI-6121 Rev D © Copyright 03/2022 MOGAS Industries, Inc.

www.mogas.com

32

33

REMOVE STEM PACKING

Using a small pick or scribe, carefully remove the
packing material

09A

and

09B

.

Make sure that all of the packing is removed.

CAUTION!

Do not scratch the stem or the packing bore in the
body. Scratches could cause a leak.

THIS WILL AFFECT THE VALVE WARRANTY.

CLEAN PACKING BOX

Before installing the new packing, make sure the
packing box is clean.

If needed, use an air hose to clean debris from
packing box before installing new packing rings.

Note:

Always wear a face shield or goggles to protect eyes from flying debris.

PACKING RING SET

The new packing ring set will contain four to five rings
total (two rope-like anti-extrusion rings

09B

and two

to three die-form stem packing rings

09A

).

Note:

Refer to Bill of Materials supplied with each individual valve serial
number for specific quantity.

!

INSTALL PACKING RINGS

Note:

Applying a spray lubricant to packing ring surfaces may ease the
installation process.

Install the rings one at a time (one anti-extrusion ring

09B

first, then each stem packing ring

09A

and then

the second anti-extrusion ring

09B

) using the gland

flange

07

as a packing tool to stuff each packing ring

all the way down against the previous ring.

Make sure scribe line of stem is lined up with scribe
line of packing gland.

CHECK POCKET DEPTH

Before installing the second anti-extrusion ring

09B

ensure there is enough depth for the anti-extrusion
ring to fit flush in the pocket.

09B

09A

09B

09A

07

Replace Stem Packing

Replace Stem Packing

5

6

7

8

«
...
15
16
17
18
19
...
»

Содержание C Series
































Отзывы:

Нет отзывов