MODSTER AN-290497, Руководство пользователя

Страница: 9 / 28

F
Manual
MDX
Spit Fire MK II
www.modster.at 9
Elevator
Trimmer
Rudder
Trimmer
Aileron
Trimmer
Digital trims allow to adjust the centered position
of aileron, rudder or elevator hinge. Each time
when a trimmer is moved, the servo output will
change one angle. If the trimmer is held, the
output will scroll in that direction until the trimmer
is released or the output reaches its end. When
you hear a short "beep" sound, it means the
trimmer is centered.
Place your plane in a neutral position, follow below steps to check the channels reactions.
Move the sticks(except the throttle stick) to see if all servo surfaces react correctly as shown in the left
diagram(left throttle for example). Swing your plane to check if all servo surfaces react correctly as shown
in the right diagram.
The one-key aerobatics feature allows beginner pilot to perform aerobatic actions by simply pressing the
button on transmitter. During flight, under X-PILOT control mode, press the one-key aerobatics button, the
transmitter will beep several times. During the beeping, simply move the aileron stick to either direction for
auto-roll. Or move the elevator stick to either direction for auto-flip.
Digital Trims
Channels Reactions Checking
One-key Aerobatics Instruction
Swing The Plane X-PILOT Reaction
Transmitter Operaton Reaction