MODSTER AN-290497, Руководство пользователя

Страница: 8 / 28

F
Manual
MDX
Spit Fire MK II
8 www.modster.at
- The airplane comes with pre-installed X-PILOT to help
control flying easily.
- The switch is with 3 levels to control the X-PILOT. To turn
on the X-PILOT, switch to upper position (towards you).
- To turn off the X-PILOT, switch to lower position.
(away from you).
CAUTION: It is strongly suggested to turn on X-PILOT while
flying the airplane.
To prevent from damages, the throttle channel is locked each time when powering on your transmitter.
Follow below instruction to unlock the throttle.
CAUTION: Keep the propeller in distance for your safety.
Turn the throttle stick up to max position until you hear a "beep" sound. Then turn the throttle stick down to
min position until you hear a "beep" sound.
Now the throttle is unlocked.
Binding is the process of programming the receiver to recognize the
GUID (Globally Unique Identifier) code of a single specific transmitter. When a receiver is bound to a
transmitter, the receiver will only respond to that specific transmitter.
If you need to rebind for any reason, please follow these steps:
1. Keep the transmitter switched OFF, throttle joystick at buttom position.
NOTICE: Keep X-PILOT switch at Middle or Beginner position.
NOTICE: Keep the plane still in a calm environment for calculating the X-PILOT.
2. Connect the battery to the plane, then turn on the transmitter within 5 seconds.
3. The receiver LED will flash for 3-8 seconds to bind automatically.
4. After the receiver LED stop flashing, it means the binding process is done.
Follow below steps when you operate a bound plane:
1. Power on transmitter first.
2. Connect the battery to the plane within 3 seconds.
3. The receiver LED in plane will flash and then turn to solid in several seconds.
4. Switch the X-PILOT control stick to X-PILOT assist level(MIDD or BEGINNER).
NOTICE: Allow the airplane stay still about 3~5 seconds in a calm environment when you first time turn
on X-PILOT, in order to calibrate and activate the X-PILOT. When the X-PILOT starts to react, means it is
activated.
5. Turn throttle stick up to max and then down to min to arm the motor.
CAUTION: Do NOT operate around people or property, otherwise it may cause serious damage!
X-Pilot Switch
Binding Instruction
Throttle Unlock (Arming)
0 - Away from you:
X-Pilot Off (Expert)
1 - At the middle: Soft
X-Pilot (Midd)
2 - Towards you: Strong
X-Pilot (Beginner)