
English
37
Note
: The sound "click" will be heard indicating the door has completely closed. When the wash cycle
has ended, you can turn off the unit by pressing the ON / OFF.
Changing the program
Reason: the washing cycle that may be changed is the wash cycle that has been running for a while.
If the detergent has been given and the wash water has been cleared, if the cases like this then the
detergent must be refilled (see the "fill in detergent").
Open the door and press the washing program that is currently running for more than 3 seconds to
cancel the washing program, then you may change the desired program (see section "start the wash
cycle"). Then close the door.
Note:
If you open the washing machine when the program is running, the engine will be in a position
"pause" and an alarm will sound, the display shows E1. When the door is closed again, the machine
will return to work after 10 seconds.
6 light program shows the state of the machine:
a. All program lights off
stand by condition.
b. One of the program lights lit
wash cycle conditions were running.
c. One of the program lights flashing
pause conditions
Note: If all the lights began to dim, it indicates that engine damage, before contacting service center,
turn off the energy source and shut off the water supply first.
Adding plates or cutlery that left behind
You can add plates or cutlery in the dishwasher before the detergent open.
1. Open the door a little to stop the washing process.
2. After the arms spray stop, the door may be fully opened.
3. Put the dishes and cutlery that are left behind.
4. Close the door, the machine will return to work after 10 second.
WARNING
!
It could be dangerous if you open the door during the washing process of the unit is running,
because hot water may spray to you.
Turn off the dishwasher
Digital display will show "- -", at this time this program has been stopped.
1. Turn off the dishwasher by pressing ON/OFF.
2. Close the water tap.
Be careful when opening the door. Hot steam may come out when the door is opened!
-
Plates in hot condition are very vulnerable to rupture. Allow the plates and cutlery for 15
minutes after completion of the washing process prior to take them out from the machine.
-
Before the plates and cutlery were taken out from the dishwasher, open the door of the
machine and let it open a little and wait a few minutes for the plates to cool and dry, and take
them out.
Emptying the dishwasher
It is normal if the inside of the engines wet.
Empty the lower basket first and then the upper basket. This will prevent water droplets from the
upper basket into the lower basket.