
English
29
Water hardness.
Position
Consumption
(Grams / cycle)
Autonomy
(cycles/2kgs)
o
dH
o
fH
o
Clark
Mmol/l
0 ~10
0 ~17
0 ~12.5
0 ~1.7
/
0
/
10 ~25
17 ~44
12.5 ~31.3
1.7 ~4.4
-
20
60
25 ~ 50
44 ~ 89
31.3 ~ 62.5
4.4 ~ 8.9
Mid
40
40
>50
>89
>62.5
>8.9
+
60
25
Contact your local water company for information on the hardness of the water in your house.
B. Fill in the Salt to the softener / Salt Container
Always use the salt that intended for dishwashers.
NOTE:
If your dishwasher models do not have this feature, the following steps can be ignored.
WATER SOFTENER
The water hardness is different in each place. If the hard water used in dishwasher, it will cause
sediment on dishes and other tableware. The unit is equipped with a special softener that uses the
salt that specifically designed to eliminate the lime and minerals in the water.
Salt container is located below the bottom of the basket, follow the instructions below for the charging
process:
Attention!!!
Only use the salt intended for dishwashers! Other types of salt that are not intended for the use of the
dishwasher, especially table salt, will damage the water softener. The Company does not provide
warranty coverage, if any damage caused by it.
Fill the salt container with special dishwasher salt before washing program is complete operate from
one of the existing program, this will prevent the grains of salt or salty water that may have split, left at
the bottom of the machine for a long time and can cause rust .
After the first round of washing the control panel light is off.
F. Remove the bottom basket and remove the salt container by turning it counter-clockwise.(1).
G. If you fill the salt container for the first time, fill in 2/3 volume with water (about 500ml).
H. Put a funnel (in the packing) to the salt container and fill in approximately 2kg of salt. If there was
a little water coming out of salt container, this is normal.
I.
Replace the cover carefully.
J. Usually, the salt warning light will be off 2-6 days after the salt container filled.
1. Remove the lid from the salt container.
2. In the salt container there is a circle with an arrow (see the next
figure), if necessary turn the arrows anticlockwise with the sign "-" as a
reference, to setup towards the "+" sign, based on the water hardness
level to be used.
Recommended setting is based on the following scheme:
1
2