Modena EI 2 W, Руководство пользователя

Страница: 7 / 17

7
Water Heater Installation
1. Determine the installation position of the water heater according to
the length of the power cord / the position of switch (the distance
from the floor to bottom part of the appliance should be ≥1.6m).
2. Make sure the distance between the appliance and the surrounding
wall is not less than 300mm, so that to have enough space for
maintenance purpose.
3. Determine the position of three fixing screws (that is attached with
the wrapping carton). Make three holes with corresponding depth to
the wall (by means of a drill) and insert a plastic wall anchor
(Fischer) into the hole.
4. Tighten one of the screws on the top side of the appliance, and
make sure that there is certain distance between the head of the
screw and the wall (see below picture).
5. Install the appliance on the wall and tighten two screws at the
bottom, connect the cords and re-install the top cover with the
screws.
(Picture 1)