73
/124
Network And Power Connection
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.7.4 Power Supply When Connected Directly To A Computer
1. Connect the factory pre-installed cable of the camera to the
camera
connector of
the PoE adapter.
2. Connect the
PC/Power
connector of the PoE adapter to the Ethernet port of the
computer.
3. Plug the RJ45 connector of the power supply unit into the
LAN/Power
connector
of the PoE Adapter.
The IP addresses in
the diagram are shown
only as an example
For the D15D you
should use the blue
MX-NPA-PoE-Set or the
MX-NPA-Box
– previous
MOBOTIXnetwork power
accessories, such as the
NPA-Set, Power-Box and
Power-Rack (MX-NPA-
Set, MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the D15D.
PoE adapter
(MX-NPA-PoE)
Power supply unit
PC (10.8.0.11/255.0.0.0)
Camera (10.8.0.99)
LAN/Power
PC/Power
Camera
RJ45
RJ45
RJ45
