68
/124
D15D Camera Manual: Mounting
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.5.3 Mounting To A Pole
Use the
stainless steel straps supplied
to affix the Corner and Pole Mount to a pole.
1. Guide the
stainless steel straps
through the
holes in the pole mount (see figure). Make sure
that you are using the slots of the mount that
best fit for the thickness of the pole. The stainless
steel straps allow the mount to be attached to
poles with diameters between 60 and 180 mm
.
2. Guide the
connection cables
from behind
through one of the large round holes of the
Corner and Pole Mount. In order to properly
protect the cabling
, you should let the cabling
run from the pole through the Corner and
Pole Mount directly into the camera.
Note:
The cable length from the pole should be
at least 80 cm!
3.
Firmly tighten the screws of the stainless steel
straps.
If required, trim the ends of the stain-
less steel straps.
Pole diameter: 60 to
180 mm
Available soon: Corner
and Pole Mount with
pre-drilled holes for the
MX-Patch-Box