2.16.3 Mounting to a Concrete or Brick Wall
Use the supplied materials and suitable tools for mounting the camera to a con-
crete or brick wall. Follow the
Mounting Instructions below to complete the installa-
tion.
Required Materials:
•
3 hex head screws (Pos. 17)
•
3 washers (Pos. 16)
•
3 dowels (Pos. 15)
Required Tools:
•
Power drill
•
Suitable drill bit
•
Wrench or ratchet for M6 hex heads
•
Hammer (optional)
•
Allen wrench 5 mm (item 3)
Mounting Instructions:
•
Hold the drilling template at the position where you would like to mount the
camera.
•
Mark the holes for drilling with a pencil or a sharp object, then remove the
drilling template.
•
Drill the holes with the power drill where you just marked.
•
Insert a dowel into each of the holes you just drilled. If required, use the
hammer to press the dowels into the holes.
•
Slide a washer (item 5) over every hex head screw (item 6).
•
Hold the camera against the wall. Make sure that the openings in the
mount's foot line up with the dowels.
•
Insert the four screws (with washers) into the openings in the foot of the
camera and into the dowels.
•
Tighten the screws using the wrench or ratchet (max. torque is 4 Nm/
2.95 lbf ft).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
78
/124
D12 Camera Manual Part 1
Find the drilling template
at the end of the manual
Max. torque for all
screws: 4
Nm
(2.95
lbf ft)
