Since the MOBOTIX D12 supports
Power over Ethernet (IEEE 802.3af)
, you can
also use PoE switches or routers for supplying power.
Section 3.3,
Connecting the Camera, contains more information on the possible
combinations of connections and power supply options.
2.3.5 Using Uninterruptible Power Supplies (UPS)
In order to maintain a continuous power supply even when utility power fails, you
should install an uninterruptible power supply (UPS). These devices also provide full
protection against electrical surges and voltage fluctuations and thus enhance the
reliability of the system as a whole.
When using more powerful 19" rack-mounted USPs, you can also protect all other
network components (e.g. switches, routers, PoE switches, etc.).
Since MOBOTIX cameras do not require any heating even in the wintertime, the
power consumption of 3 W is quite low. This in turn means that you can centralize
the USP-protected power supply by injecting power into the network cables (max.
100 m/300 ft.). This kind of protected power supply can be used either with MO-
BOTIX PoE products (MX-NPA-3-RJ + external power supply or MX-NPR-4/8/20) or
with PoE-compliant switches according to IEEE 802.3af.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
34
/124
D12 Camera Manual Part 1
PoE components without
fans increase overall reli-
ability of the entire sys-
tem
UPS not only protect the
camera against power fail-
ures, they also protect
network devices against
damage from voltage
peaks and low voltage
Typical setup of a 19" sys-
tem with UPS
Note
If you are using
Power over Ethernet (IEEE 802.3af) network compo-
nents
for supplying power to the MOBOTIX D12, make sure that these
components do not have a fan. Since the power consumption of MO-
BOTIX cameras is very low compared to other products, this increases
the reliability of the entire system and expands the life cycle of these
components.
MOBOTIX NPR/
PoE Switch
PC/server
Raid
USV
