•
Remove the
rubber plug from the blue cable guide beneath the left side
of the cable cover
and store the plug in a safe place.
If you are only using one cable later on, close
the unused cable guide again using this
plug. This will ensure that the camera re-
mains weatherproof (IP65), even if it has only
one cable.
•
Insert the cable into the cable guide.
•
If you are using both connectors, the two ca-
bles should cross one another in front of the
connectors.
•
Push the
cable cover (item 7)
back into its
seat and fasten the two Allen screws M4x25.
When mounting the cable cover, take care to
properly align the cover with the seal of the
camera housing and the two cable guides.
This will ensure that the camera remains
weatherproof (IP65).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
36
/124
D12 Camera Manual Part 1
If you are only using one
cable, close the unused
cable guide with one of
the supplied
rubber plugs
Example:
Yellow: Network
Green: ISDN
Always mount the cable
cover (IP65)!
