MOBILTEX® DATA LTD.
TITLE:
Installation and Operating Instructions
Calgary, Alberta
DOCUMENT NO.:
SPI1-MAN-001
SHEET:
15 of 57
REV:
1.14
Figure 11 SPI1 AC Charge Cable
Figure 12 SPI1 DC Charge Cable
Figure 13 shows the serial programming cable (P/N W16400CPI06) for the SPI1 Portable or Stationary Interrupters.
The cable may be used to load new firmware into the SPI1 by attaching the DE-9S connector to the serial port on a
PC and using the ‘SPI1Loader.exe’ application. This cable may also be used for configuration of general parameters
and schedules using the PC-based utility ‘SPI1Config.exe’.
