Zeus200
Installation manual
V 1.0.7 - 12/10/2020
Page 10 of 28
2.2
Filter and external pump
2.2.1
Components list
#
Code
Description
N.
1
Z200-07-013
Water filter
1 pc
2
Z200-07-010
External cooling pump
1 pc
3
Z200-03-014
Hose connection from ¾ to 20mm
2 pcs
2.2.2
Mounting instruction
1.
Starting from the seacock group with safety tap, which must be positioned below the
waterline, fit the supplied water filter (1). The filter must be positioned so that it can be
checked and, if necessary, cleaned or replaced
2.
Immediately after the filter, place the supplied external water pump (2) in a vertical position
or possibly rotated 90° keeping the water inlet higher than the outlet following the correct
direction as indicated by the arrow printed on the pump itself. The external water pump must
not be submerged and must operate in the presence of water and not dry. Any damage to the
external water pump due to dry running is not covered by the warranty
