Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Assembly and installation of the bed lever:
Mounting on a spring mattress/divan bed
Note
: We do not recommend fitting this product to a spring mattress unless an appropriate risk assessment has
been carried out.
3.1a Remove the mattress and place the Bed Rail Board onto the
divan base in the desired position. Ensure that the Hand Rail Guide
is positioned downwards over the edge of the divan (see Diag.1).
3.1b Place the Hand Rail into the Hand Rail Guide. Please Note: the
hand rail can be rotated so the angled part of the handle is facing tow
ards or away from the user, depending on their needs. Secure in position
with the two e-clips.
3.1c Position the Bed Rail such that the user can reach the handle from
a relaxed lying position without having to stretch. For the safety of the
user, this must be at least 318mm away from the headboard or footboard.
(see Diag.2).
Diagram 1
To secure the Bed Rail to the divan bed with the straps provided,
as follows:
3.1d Take the first strap. Place the female buckle through one of the
triangular slots near the Hand Rail and tie a secure knot. The
buckle should hang down the side of the bed around 50-75mm
(2-3 inches) (see Diag.3).
3.1e Feed the strap under the bed-rail board and up through the rear
triangular slot , loop it round the end of the bed board and back
through the slot (see Diag.3). The strap should be tight under the
bed-rail board, and the bed-rail board should not slide on the strap.
Diagram 2
3.1f Feed the strap over the top of the bed and back underneath the
base (see Diag.3).
3.1g Once the strap is underneath the divan base, bring the male
buckle up the side of the bed to meet the female buckle hanging
down.
3.1h Clip the two ends of the strap together.
3.1i Pull down on the loose end of the strap to tighten. The Bed
lever Base should be tight against the divan base. Tuck the loose
end of the straps under the bed to prevent tripping.
3.1j Repeat for the second strap, fitting to the other side of the Bed
lever Board. The Bed Rail should now be fully secured to the divan
base (see Diag.3).
Diagram 3
3.1k Replace the mattress. Check the Bed Rail is stable and secure
before use.
Rev. 20.05.22
12 - 20
UM-311815-MULTI_20052022.odt
