Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Assembly instructions - Slatted mattress with fixed slats:
3.2a Remove the mattress and place the Bed lever Board inside the
wooden bed frame. Ensure that the Hand Rail Guide is positioned
upwards (see Diag.4).
3.2b Place the Hand Rail into the Hand Rail Guide. Please Note, the
hand rail can be installed so the angled part of the handle is facing
towards or away from the user, depending on their needs. Secure
in position with the two e-clips (see Diag.4).
3.2c Position the Bed Rail such that the user can reach the handle from
a relaxed lying position without having to stretch. For the safety of the
user, this must be at least 318mm away from the headboard orfootboard.
Secure the Bed Rail to the bed with the straps provided:
3.2d Thread one end of the strap (with female buckle) from under the
bed up around the bed slat, through the triangular slot on side of the
Bed lever Board and back under the bed past the slat (see Diag.6).
3.2e Repeat step 3.2d using the other end of the strap (with male
buckle) through the opposite triangular slot on other side of the Bed
lever board (see Diag.6).
3.2f Pull both buckles so they meet in the middle on the underside
of the bed and clip together (see Diag. 5). Pull the loose end of the
strap to tighten. Tuck away any loose strap ends to prevent tripping.
3.2g Repeat the procedure for the second strap at the bottom of the
Bed lever Board (see Diag.7).
3.2h Replace the mattress. Check the rail is stable and secure
before use.
3.3 Installation Instructions - Slatted Bed with loose slats:
For beds where the slats are not individually secured to the bed
frame, do not use the fixing straps.
3.3a Assemble the Bed Rail as shown in Diagram 4 above.
3.3b To provide additional security, we recommend placing a
non-slip mat between the Bed Rail and the slats (see back
page for details).
3.3c Replace the mattress. Check
Accessories
No accessories for this product.
Transport recommendations
For transport, the handle can be removed to reduce the size.
4. Technical Data:
Bed lever
311815
Dimension (WxDxH) (mm)
335/625/547
Weight (Kg)
3.30
Max. Load user (kg)
150
Max. Load (kg) (kg)
100
Rev. 20.05.22
13 - 20
UM-311815-MULTI_20052022.odt
