WARNING
Do not use the cutting plotter in a location where it will be
exposed to water, rain or snow.
•
Such location may cause electrical shock or a fire hazard
due to current leakage.
If the cutting plotter generates smoke, is too hot, emits a
strange odor, or otherwise functions abnormally, do not
continue using it. Turn off its power and unplug its power
cord from the electrical socket.
•
Use of the cutting plotter in such status may result in a
fire hazard or electrical shock.
•
After confirming that smoke is no longer being generated,
contact your sales representative or nearest Graphtec
vendor to request repair.
•
Never try to perform repair yourself. Repair work by
inexperienced personnel is extremely dangerous.
Do not allow dust or metallic matter to adhere to the
power plug.
•
A dirty power plug may result in electrical shock or
a fire hazard due to current leakage.
Do not use the power cord if it is damaged.
•
Use of a damaged cord may result in electrical shock or a
fire hazard due to current leakage.
•
Replace the power cord with a new one.
Be careful when handling the cutter blade.
•
Touching the blade with your bare hand may cause
injury.
•
During a cutting operation, keep away from the cutter
blade.
Avoid water
Beware of
electrical shock
Prohibited
Beware of
electrical shock
Unplug the power
cord from the socket
No touching
Safety Precautions: (Continued)
Prohibited
