CAUTION
Do not use or store the cutting plotter in a location
exposed to direct sunlight or the direct draft of an air
conditioner or heater.
•
Such location may impair the performance of the
cutting plotter.
Do not use the cutting plotter in an excessively dusty or
humid location.
•
Such location may impair the performance of the
cutting plotter.
Do not place any receptacle containing water or other fluid
on top of the cutting plotter.
•
Fluid falling inside the cutting plotter may cause
electrical shock or a fire hazard due to current leakage.
Do not use the cutting plotter in a location subject to
excessive mechanical vibration or electrical noise.
•
Such location may impair the performance of the
cutting plotter.
When disconnecting the power cord or an interface cable,
do not pull on the cord/cable.
•
Such action will damage the cord/cable, resulting in a fire
hazard or electrical shock. Be sure to hold the power
cord's plug or the interface cable's connector.
If water or foreign matter enters inside the cutting plotter,
do not continue using it. Turn off its power and unplug its
power cord from the electrical socket.
•
Use of the cutting plotter in such status may result in
electrical shock or a fire hazard due to current leakage.
•
Contact your Partner Success Manager or return the
entire machine to Mobile Outfitters.
Prohibited
Avoid water
Beware of
electrical shock
Safety Precautions: (Continued)
Prohibited
Prohibited
Prohibited
Unplug the power
cord from the socke
