4
3
0DNHVXUHWKDWWKHWRROEUDFNHWLVHQJDJHGRQWKHWRROVÁDQJHDQGWKHQWLJKWHQWKHVFUHZ
Flange
Bracket to hold tool
Removing the tool
When removing the tool, turn it counterclockwise to remove the tool.
2. Loading Media (Paper or Marking Film)
Supplement
For more information about the position of the
SXVKUROOHUVHH$GMXVWWKH3XVK5ROOHU
Both roll media and sheet media can be used with the 5DSLG&XW.
Load the media according to the instructions given for each type. Use the grit roller on the right side of the media (looking
IURPWKHIURQWDVDJXLGHZKHQVHWWLQJLWLQWKHPHGLDVHQVRU$IWHUZDUGVDGMXVWWKHSXVKUROOHUVRWKDWLWVOLQHGXSZLWKWKH
side of the media.
For details, see User's Manual (PDF).
Loading Roll Media
1
Lower the media set lever to raise the push rollers.
Media sensor
Push roller
Media set
lever
2
Set the roll media on top of the stock shaft, and then insert the roll media into the stopper. Once it's set, tighten the
stopper's screws.
Stopper
Plug the USB cable into the USB 3.0 port here
Once the USB cable is plugged in, rotate the tablet to be parallel with the cutting
machine, as shown below.
2
.1
