S15 DC, S15 DC/AC, U15 DC
Operation
9
5
Operation
I
Note
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the “Cleaning and maintenance”
chapter on page 10).
5.1
Energy saving tips
z
Choose a well ventilated installation location which is protected against di-
rect sunlight.
z
Allow warm food to cool down first before placing it in the device to keep
cool.
z
Do not open the cooling device more often than necessary.
z
Do not leave the lid or door open for longer than necessary.
5.2
Using the cooler
a
Caution!
The lid of the cool box must always be secured with the lock when
loading and unloading (fig.
2
, page 3). If the lid is fully open with-
out being secured, the box could tip over.
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤
Place the cooler on a firm base.
➤
Connect the 12 V connection cable to the cigarette lighter or a 12 V plug
socket in the vehicle.
or …
➤
S15 DC/AC only:
connect the 12 V connection cable to the rectifier
(fig.
3
, page 3) and plug rectifier into a 100 – 240 V AC socket.
I
Note
Close the box tightly by pushing down the lid.
_S15_U15.book Seite 9 Freitag, 20. Februar 2009 5:13 17