TO START
A.
Plug one of the AC/DC adapters (they are interchangeable) into the monitor and allow it to
charge the Monitor Battery
for at least 5-1/2 hours.
B.
Plug the other AC/DC adapter into the camera.
Turn the Camera On
by holding the
ON/OFF
Button
down for several seconds. The green “Power On” Indicator lights when powered up.
C. Turn the Monitor On
by holding its
ON/OFF Button
down for several seconds. Its “Power On”
Indicator will light up (green on battery power, red when charging) and the Mobi logo will
appear on the screen.
D. Press ESC Button
to go to the
Main Menu
.
NOTE: While viewing the Main Menu, if no
buttons are pressed, or the screen is not
touched after 30 seconds, the monitor will
automatically exit the Main Menu mode.
Main Menu
E. Press ESC Button
once again to go to the
Camera View
. Along the top and bottom
of the screen, small “Per Camera” Icons (ex-
plained on page 16) will appear over the
view from the camera, which should be on
and paired with the monitor.
PAIRING
:
The monitor and camera are paired (wirelessly linked) by the manufacturer at the fac-
tory. If you ever need to relink the camera, or you want to pair Additional Cameras (sold separately)
you will need to pair each following the steps below:
NOTE: Before pairing be sure the camera and monitor are both turned on and both are
within 10 feet of each other.
IMPORTANT:
Use ONLY
a fingertip or other NON-
SHARP object to select
touch screen options.
Using sharp objects can
damage the screen and
void the warranty.
Camera View
1
. Power On
the Monitor and Camera
2
.
Press and hold the
Pair Button
on the back of the
Monitor
until the “Pair” screen is displayed,
LOCKING THE SCREEN
:
If you slide the
Lock Screen Button
a LOCK icon will appear and the
touch-screen function will be disabled. Sliding the Lock Screen Button again will revert it back to
normal touch-screen function.
TO SET TO ANOTHER LANGUAGE
:
The monitor is set to
English
by default. The
MobiCam® DXR Touch can also display in
French, German, Por tuguese, Spanish,
or
Italian
. To change the language follow these steps: press the
ESC Button
touch
Setting
icon
touch
System Setting
touch slider to
See More List
select
Language
from the list
select a new
Language
press the
ESC Button
then release the button.
3
.
Press and release the
Pair Button
on the
Monitor
and select a camera number (1-4) to be
paired. The word “
Pairing
” appears below the icon of the selected camera as it waits to be
paired.
4
.
You have 10 seconds to press and hold the
Pair Button
on the back of the
Camera
to com-
plete Pairing, otherwise restart from step 2 above.
5.
The word “
OK
” or “
Failed
” will be displayed on screen. If pairing Failed start again being sure
the camera is on and not too far away.
6.
When Pairing shows as OK, press the
ESC Button
or the
Return
icon
to go back. To pair
additional cameras repeat the steps above.
4
5
